Some important informations about using remote control software:

1. You must have fixed IP local network with properly configured gateway and addresses

2. Since it is a LAN you must have a switch/hub in the network

3. No direct connection of amplifier <---> PC is possible!

4. Each devices in the network must have unique IP addresses otherwise collision occurs

5. Each devices in the network must have unique MAC addresses otherwise collision occurs

6. If there are two devices in the same network with same addresses it would disturb the operation

7. Once the remote control option is unused the remote control feature shall be disabled in the menu
of the amplifier

8. The ampcontrol does not work in DHCP or non-fixed IP network
